KPB-2F13､KPB-2F18､KPB-2F25 兩麵吸附永磁夾具91视频免费观看网站KANETEC 型號：KPB-2F13､KPB-2F18､KPB-2F25 品牌：91视频免费观看网站KANETEC強力 名稱：兩麵吸附永磁夾具 ［用途］ 在電火花、磨削加工中，可夾持工件。在組裝作業和輕加工時，可作為夾具使用。 ［特點］ ●屬兩麵吸附型，對兩麵可分別進行ON/OFF 切換（2F）。 ●通過磁鐵的ON/OFF（2F），以固定在作業台上。 ●可作側麵的吸附（ON/OFF 切換操作麵）（2F）。 ●固定在作業台時，使用安裝麵的螺絲孔。此外，也可通過磁鐵吸盤吸附進行固定（1F）。 ●兩側麵均持有操作部，因此能輕鬆地進行切換作業。 ●重量輕，能簡單地調節位置。 ●可拆卸操作盤，因此不會妨礙作業。 ●2 台/1 套，已同時進行了精工。 ●屬防滴、耐油結構，可在液體中使用。 KPB DOUBLE-FACE HOLDING PERMANENT MAGNETIC BLOCK ［Application］ These blocks can hold workpieces during electric discharge machining and grinding. They can also be used as holding tools for assembly and light duty machining. ［Features］ ●The both sides can hold workpieces and can be turned on and off individually. (2F type) ●They are secured to the work table by turning on and off the magnet. (2F type) ●The side faces (ON/OFF switchover face) can also hold workpieces. (2F type) ●They are secured to the work table using tapped holes provided on the mounting face. They can also be secured by having them held by a magnetic chuck. (1F type) ●The operation part is provided on both side faces to facilitate on/off operation. ●Light weight for easy positional adjustment. ●The operating handle is detachable and does not hinder the work. ●One set of two blocks has been machined and finished together. ●They are of drip-proof and oil-resistant construction to allow them to be used in fluid.
KPB-2F13､KPB-2F18､KPB-2F25 兩麵吸附永磁夾具91视频免费观看网站KANETEC 型號：KPB-2F13､KPB-2F18､KPB-2F25 品牌：91视频免费观看网站KANETEC強力 名稱：兩麵吸附永磁夾具 ［用途］ 在電火花、磨削加工中，可夾持工件。在組裝作業和輕加工時，可作為夾具使用。 ［特點］ ●屬兩麵吸附型，對兩麵可分別進行ON/OFF 切換（2F）。 ●通過磁鐵的ON/OFF（2F），以固定在作業台上。 ●可作側麵的吸附（ON/OFF 切換操作麵）（2F）。 ●固定在作業台時，使用安裝麵的螺絲孔。此外，也可通過磁鐵吸盤吸附進行固定（1F）。 ●兩側麵均持有操作部，因此能輕鬆地進行切換作業。 ●重量輕，能簡單地調節位置。 ●可拆卸操作盤，因此不會妨礙作業。 ●2 台/1 套，已同時進行了精工。 ●屬防滴、耐油結構，可在液體中使用。
KPB DOUBLE-FACE HOLDING PERMANENT MAGNETIC BLOCK ［Application］ These blocks can hold workpieces during electric discharge machining and grinding. They can also be used as holding tools for assembly and light duty machining. ［Features］ ●The both sides can hold workpieces and can be turned on and off individually. (2F type) ●They are secured to the work table by turning on and off the magnet. (2F type) ●The side faces (ON/OFF switchover face) can also hold workpieces. (2F type) ●They are secured to the work table using tapped holes provided on the mounting face. They can also be secured by having them held by a magnetic chuck. (1F type) ●The operation part is provided on both side faces to facilitate on/off operation. ●Light weight for easy positional adjustment. ●The operating handle is detachable and does not hinder the work. ●One set of two blocks has been machined and finished together. ●They are of drip-proof and oil-resistant construction to allow them to be used in fluid.